Kingston Pools and Hot Tubs – Why a Fiberglass pool you ask?

Why Fiberglass:

Why smart buyers are turning to fiberglass – Dolphin fiberglass pools give you trouble free, worry free summers.

Speed of Installation- Your fiberglass swimming pool will arrive direct from the manufacturing facility, ready to install. You will be swimming in less than a week! How cool is that!

Smooth Finish – Dolphin fiberglass pools have a smooth clean gel coat finish that is non-abrasive and known throughout the industry. There are no sharp edges or rough finishes.

Amazing Strength – Dolphin fiberglass pools are manufactured in Canada to the finest standards by those who understand and live in this climate. The high tensile strength of fiberglass will allow the pool shell to flex without cracking to accommodate earth movement and no, they will not pop out of the ground.

Maintenance Free – The gel coat finish on a Dolphin Fiberglass Pool looks amazing and will provide many, many years of worry free swimming. Our fiberglass pools are non-porous unlike the ‘other’ gunite and vinyl pool manufacturers therefore algae does not adhere to the gel coat surface.

Low Chemical Usage – No one likes swimming in a chemical bath. It doesn’t have to be that way! With Dolphin Fiberglass Pools the surface is chemically inert so there is absolutely nothing in the pool surface that can alter the water chemistry. Hence, very low chemical usage and considerable cost savings today and tomorrow.

Interior Finishes: 2 new colours introduced for 2014. Slate is a beautiful slate blue/grey and Midnight of course is black with a blue fleck

Great Designs – Dolphin Fiberglass Pools prides itself on being at the cutting edge of pool design technology. All of our models are state of the art designs and will complement any backyard.

Compatibility – With Dolphin Fiberglass Pools you can use any systemsalt chlorinators, chlorine, fresh water systems, ozone systems they all work wonderfully

Warranty – 25 years

Dispelling the Myth – The most common myth surrounding fiberglass pools is that “fiberglass pools pop or float out of the ground.” When you are told this you should immediately ask just how a pool with 80 tons of water in it pops out of the ground. Seriously. . .The reality is that no more will a gunite or vinyl liner pool pop or float than will fiberglass pools. In fact, any watertight object will float if there is more water under it than in it. Pools can only float when they are drained and the water under the pool exerts upward pressure because there is no water in the pool.

So why would you need to drain a pool? Gunite pools need frequent draining to remove cracks, acid wash, clean stains and re-plaster the pool. Similarly, vinyl liner pools must be drained to replace liners or repair liners. Fiberglass pools carry a 25 year warranty and never need resurfacing so there is no need to drain the pool therefore there is no chance it will pop out of the ground.

Additionally if you have a problem with ground water, we have that covered too…we put in a drain pipe that a simple small pump can be inserted along with a garden hose to drain off water pooling around the base of the pool.

Don’t wait, give us a call now to make your beautiful outdoor living space a reality.

Posted in Uncategorized

Leave a Reply